2016 November Cisco Official New Released 642-035 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
Lead2pass 642-035 braindumps including the exam questions and the answer, completed by our senior IT lecturers and the Cisco product experts, include the current newest 642-035 exam questions.
Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/642-035.html
QUESTION 41
How does the FSM react after an error or timeout at a stage?
A. stops
B. retries until successful
C. continues
D. retries that stage at scheduled intervals
E. raises faults and continues
Answer: D
QUESTION 42
On a Cisco UCS B-Series data center environment; how many default roles are there when utilizing RBAC for security restriction?
A. 1
B. 5
C. 10
D. 15
E. 20
Answer: C
QUESTION 43
While updating firmware in a Cisco UCS environment, what will the Cisco UCS Manager do?
A. show you all versions available on Cisco.com
B. show you all versions downloaded to the Cisco UCS Manager
C. show you only versions that are supported in your environment
D. show you only versions that you selected to show
E. show you old and new versions from your download
Answer: C
QUESTION 44
What is the maximum number of boot targets for an FCoE vHBA on a Cisco UCS C-Series server?
A. 1
B. 2
C. 3
D. 4
Answer: D
QUESTION 45
Which CLI command identifies the service profile that is associated with a particular compute blade, VIF, vNIC type, link state, and pinned interface?
A. show service-profile path server 1/2
B. show service-profile circuit server 1/2
C. show server-blade circuit server 1/2
D. show server-blade path server 1/2
Answer: B
QUESTION 46
Refer to the exhibit. Which mistake did the UCS administrator make when trying to access the GUI?
A. specified the incorrect login domain
B. did not use the VIP
C. tried to login before the GUI had fully booted up
D. password is incorrect
E. attempted to login to the subordinate cluster peer
Answer: E
QUESTION 47
Refer to the exhibit. In a Cisco UCS environment, which switch mode does the exhibit portray?
A. end host mode
B. switching mode
C. access mode
D. core mode
Answer: A
QUESTION 48
Refer to the exhibit. Which type of power policy is shown when referring to a Cisco UCS environment?
A. chassis
B. blade server
C. fabric interconnect
D. global
E. switch
Answer: D
Hotspot Question I
QUESTION 49
Hotspot Question I
Answer:
QUESTION 50
Hotspot Question I
Answer:
QUESTION 51
Hotspot Question I
Answer:
QUESTION 52
Hotspot Question I
Answer:
Hotspot Question II
QUESTION 53
Hotspot Question II
Answer:
QUESTION 54
Hotspot Question II
Answer:
QUESTION 55
Hotspot Question II
Answer:
QUESTION 56
Hotspot Question II 
Answer:
QUESTION 57
A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B- Series blade server; however, the boot fails. What is the cause of this failure?
A. The local disk must be the first device in the boot order.
B. eUSB is not a supported boot device.
C. eUSB support is available only on the Cisco UCS C-Series rack server.
D. eUSB is not the first device in the boot order for the server.
Answer: D
QUESTION 58
A customer is troubleshooting degraded DIMM errors on a Cisco UCS blade server and would like to reset the BMC. What is the correct command sequence to reset the BMC?
A. UCS1-A# server x/y
UCS1-A /chassis/server # scope bmc
UCS1-A /chassis/server/bmc # reset
UCS1-A /chassis/server/bmc* # commit-buffer
B. UCS1-A# server scope
UCS1-A /chassis/server # scope bmc
UCS1-A /chassis/server/bmc # reset
UCS1-A /chassis/server/bmc* # commit-buffer
C. UCS1-A# scope server x/y
UCS1-A /chassis/server # scope bmc
UCS1-A /chassis/server/bmc # reset
UCS1-A /chassis/server/bmc* # commit-buffer
D. UCS1-A# scope server x/y
UCS1-A /chassis/server # scope bmc
UCS1-A /chassis/server/bmc* # commit-buffer
Answer: C
QUESTION 59
Which commands can you enter to see if a component in the Cisco UCS domain generated a core file?
A. 6100-A# scope monitoring
6100-A /monitoring # scope sysdebug
6100-A /monitoring/sysdebug # show cores
Core Files:
Name Fabric ID
———- ———
B. 6100-A# scope sysdebug
6100-A /sysdebug # scope monitoring
6100-A /sysdebug/monitoring # show cores
Core Files:
Name Fabric ID
———- ———
C. 6100-A# scope system
6100-A /system # scope monitoring
6100-A /system/monitoring # show cores
Core Files:
Name Fabric ID
———- ———
D. 6100-A# scope cores
6100-A /cores # show cores
Core Files:
Name Fabric ID
———- ———
E. 6100-A# scope logging
6100-A /logging # scope monitoring
6100-A /logging/monitoring # show cores
Core Files:
Name Fabric ID
———- ———
Answer: A
QUESTION 60
Which four tech support files can you create with the Cisco UCS Manager that you can submit to Cisco TAC for support? (Choose four.)
A. UCSM
B. disk LUNs
C. fabric extender
D. memory
E. rack server
F. chassis
G. server cache
Answer: ACEF
If you use Lead2pass braindump as your 642-035 exam prepare material, we guarantee your success in the first attempt. Lead2pass 642-035 dump provides you everything you will need to take your 642-035 Exam.
642-035 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDbEhhbDNSUlllZVk
2016 Cisco 642-035 exam dumps (All 175 Q&As) from Lead2pass:
http://www.lead2pass.com/642-035.html [100% Exam Pass Guaranteed]