Free Downloading 400-201 Exam Dumps PDF From Lead2pass:

https://www.lead2pass.com/400-201.html

QUESTION 31
Cisco IOS XR software is partitioned into three planes: control, data, and management. Which three of these belong to the data plane? (Choose three.)

A.    XML
B.    RIB
C.    FIB
D.    QoS
E.    PFI

Free Lead2pass Cisco 400-201 Dumps VCE Download:

https://www.lead2pass.com/400-201.html

QUESTION 21
What IOS commands display MPLS label mapping on an LSR?

A.    Show mpls ldp parameters
B.    Show mpls ldp bindings
C.    Show mpls forwading-table
D.    Show mpls ldp discovery
E.    Show mpls ldp neighbor detail

Answer: B

QUESTION 22
Drag and Drop Questions

Answer:

QUESTION 23
Refer to the exhibit. The vrf MAINT has been provisioned and used by the Service Provider management network. The engineer discovers that syslog messages are not being received on the syslog server. IP reachability has been validated using ping.
Which issue in the configuration must be corrected?

A.    logging on must include the vrf MAINT keyword.
B.    logging host must include the vrf MAINT keyword.
C.    The logging facility must be configured for syslog processing.
D.    The route targets that are configured do not match the route distinguisher.

Answer: B
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2sr/12_2sra/feature/guide/srvrfslg.html#wp1059076

QUESTION 24
Which are the three header fields that affect how Equal-Cost Multipath hashes traffic flow into interface groups? (Choose three.)

A.    source MAC address
B.    source port
C.    source IP address
D.    destination IP address
E.    IP protocol ID
F.    destination MAC address

Answer: BCD

QUESTION 25
An R1 router requires an equal load balancing to reach the prefix 192.168.0.0/16 over two exit points: through R2 and R3 routers. Which two options must be configured on the R1 router to achieve this goal? (Choose two.)

A.    The BGP maximum path feature must be configured on R1.
B.    The BGP PIC core must be enabled on R1
C.    Weight, local-pref, MED, as-path length, origin, and the BGP next-hop IGP cost must be the same for the R2 and R3 IBGP updates to R1.
D.    The BGP Link Bandwidth feature must be applied on R1.
E.    BGP extended community exchange must be enabled between IBGP neighbors.

Answer: AC
Explanation:
BGP link-bandwidth is for unequal-cost routes.

QUESTION 26
A company is deciding between an HVR and SVR solution in order to finalize a virtualization project proposal. Which is an advantage of a HVR solution versus a SVR solution?

A.    A HVR solution implements dedicated data plane resources.
B.    A HVR solution implements shared control plane resources.
C.    A HVR solution introduces significant contention of resources.
D.    A HVR solution implements dedicated chassis resources.

Answer: A
Explanation:
http://www.cisco.com/en/US/solutions/collateral/ns341/ns524/ns562/ns573/white_paper_c11-512753_ns573_Networking_Solutions_White_Paper.html

QUESTION 27
Which three of these are optical channel data unit (ODU) overhead fields? (Choose three)

A.    general communication channel 0 (GCC0)
B.    section monitoring
C.    reserved (RES)
D.    general communication channels 1 and 2 (GCC1 GCC2)
E.    tandem connection monitoring activation deactivation (TCM ACT)

Answer: CDE

QUESTION 28
Which three modes are the operating of HDLC? (Choose three)

A.    asynchronous balanced mode (ABM)
B.    normal response mode (NRM)
C.    normal peer mode (NPM)
D.    asynchronous client mode (ACM)
E.    asynchronous response mode (ARM)

Answer: ABE
Explanation:
Asynchronous response mode is an HDLC addition[1] for use over full-duplex links. While retaining the primary/secondary distinction, it allows the secondary to transmit at any time. Asynchronous balanced mode added the concept of a combined terminal which can act as both a primary and a secondary. There are some subtleties about this mode of operation; while many features of the protocol do not care whether they are in a command or response frame, some do, and the address field of a received frame must be examined to determine whether it contains a command (the address received is ours) or a response (the address received is that of the other terminal).

400-201 dumps full version (PDF&VCE): https://www.lead2pass.com/400-201.html

Large amount of free 400-201 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDMExNMWJIYTlIcUU

400-201 Exam Dump Free Updation Availabe In Lead2pass:

https://www.lead2pass.com/400-201.html

QUESTION 11
Which two flexible service mapping features that are used on the ES40 line card can classify traffic into different service instances, in order to consume fewer VLANs? (Choose two.)

A.    CoS
B.    DSCP
C.    IP precedence
D.    MPLS experimental bit
E.    ToS
F.    EtherType

Easily Pass 400-201 Exam With Lead2pass New Cisco 400-201 Brain Dumps:

https://www.lead2pass.com/400-201.html

QUESTION 1
When will the primary processor core dump run in case of a switchover?

A.    never takes place
B.    periodically
C.    during switchover
D.    after switchover
E.    before switchover

2017 November Cisco Official New Released 400-201 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

How to pass 400-201 exam easily? Are you struggling for the 400-201 exam? Good news, Lead2pass Cisco technical experts have collected all the questions and answers which are updated to cover the knowledge points and enhance candidates’ abilities. We offer the latest 400-201 PDF and VCE dumps with new version VCE player for free download, and the new 400-201 dump ensures your 400-201 exam 100% pass.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/400-201.html

QUESTION 581
Refer to the exhibit, An engineer is asked to troubleshoot packet drops inside a network which option is true?

2017 November Cisco Official New Released 400-201 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

We at Lead2pass are committed to help you clear your 400-201 certification test with high scores. The chances of you failing to clear your 400-201 test, after going through our comprehensive exam dumps is very bleak.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/400-201.html

QUESTION 561
Which three network topologies can be deployed on the cisco ASR 9000 satellite nV System network? (Choose three)

A.    Mesh Network
B.    Layer 2 fabric
C.    Dual home
D.    Overlay network
E.    Dual ring
F.    Hub and spoke

2017 November Cisco Official New Released 400-201 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass dumps for 400-201 exam are written to the highest standards of technical accuracy, provided by our certified subject matter experts and published authors for development. We guarantee the best quality and accuracy of our products. We hope you pass the exams successfully with our practice test. With our Cisco 400-201 dumps, you will pass your exam easily at the first attempt. You can also enjoy 365 days free update for your product.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/400-201.html

QUESTION 541
Which are the two limitations of the predefined NAT solution? (Choose two)

A.    Only the port-presentation option is available
B.    NetFlow and syslog are not supported
C.    The predefined mode cannot be turned on or off during the active translations
D.    Port allocation must be uniform for all subscribers
E.    The global port limit parameter is not available for the predefined mode

2017 November Cisco Official New Released 400-201 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass is ready to provide Cisco candidates with 400-201 exam dumps which can be very helpful for getting Cisco certification, which means that candidates can easily get access to the services of Cisco 400-201 exam dumps, which will assure them 100% passing success rate. With Lead2pass 400-201 exam dumps, it will be easy to pass your 400-201 exam at your first time.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/400-201.html

QUESTION 521
Which are two benefits of using segment routing over RSVP-TE for traffic engineering? (Choose two)

A.    Segment routing traffic engineering tunnels always follow the low-latency path
B.    ECMP-aware traffic engineering is natively supported by segment routing
C.    Per-flow state is present only at the ingress node to the Segment routing-enabled network
D.    Per-flow state is present at the ingress and egress node to the segment routing-enabled network
E.    Per-flow state is maintained on all nodes of the segment routing-enabled network

2017 November Cisco Official New Released 400-201 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

There are many companies that provide 400-201 braindumps but those are not accurate and latest ones. Preparation with Lead2pass 400-201 new questions is a best way to pass this certification exam in easy way.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/400-201.html

QUESTION 501
Refer to the exhibit. AS2000 has deployed the BGP additional path feature. Assuming GP filtering has been deployed in any routers, how many entries does R1 have in the RIB/FFIB table for the 18.47.3.0/24 prefix?

2017 November Cisco Official New Released 400-201 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

I have already passed Cisco 400-201 certification exam today! Scored 989/1000 in Australia. SO MANY new added exam questions which made me headache….. Anyway, I finally passed 400-201 exam with the help of Lead2pass! 

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/400-201.html

QUESTION 461
A layer 3 VPN customer opened a case that reports connectivity loss with remote sites.
An operations engineer realized this connectivity loss happened after the LDP label filtering was applied.
What is the root cause of this issue?

A.    Labels were not allocated for the P and PE physical interface.
B.    Labels were not allocated for the PE, P and RR physical interface
C.    Labels were not allocated for the CE loopback and physical interface
D.    Labels were not allocated for the P loopbacks
E.    Labels were not allocated for the PE, P and RR loopbacks.
F.    Labels were not allocated for the PE loopback