2017 January Cisco Official New Released 500-170 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
We never believe in second chances and Lead2pass brings you the best 500-170 Exam Questions which will make you pass in the first attempt. We guarantee all questions and answers in our 500-170 Dumps are the latest released, we check all exam dumps questions from time to time according to Cisco Official Center, in order to guarantee you can read the latest questions!
Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/500-170.html
QUESTION 11
For FI 6248 with a GEM module, what is the possible assignment of ports for native Fibre Channel and Ethernet?
A. Eth ports: 1-21, 33-48, Fibre Channel ports. 22-32
B. Eth ports: 1-18, 33-40, Fibre Channel ports. 19-32, 41-48
C. Eth ports: 1-21, Fibre Channel ports. 22-48
D. Eth ports: 1-16, 41-48, Fibre Channel ports. 17-40
Answer: B
QUESTION 12
Cisco UCS Manager may be used to manage which four tasks within a Cisco UCS domain? (Choose four)
A. Cisco UCS hardware including the chassis, servers, fabric interconnects, and i/o modules
B. Cisco UCS resource management including WWN addresses, MAC addresses, UUIDs, and bandwidth
C. Deployment of a Windows or Linux Operating system
D. Management of non-Cisco x86 systems
E. Network administration such as creating VLANs, uplink ports, port channels and LAN PIN
groups
F. SAN configuration tasks such as creating VSANs, QoS classes and definitions, and port
channels.
G. Deploy patches for software, such as an OS or an application
H. Install software applications, such as databases, application server software, or web servers
Answer: ABEF
QUESTION 13
Which item is an example of Role-Based Access Control and multi-tenancy support that can be applied to a UCS environment using the Cisco UCS Manager?
A. Create roles for Data ONTAP Vserver administrators
B. Create a storage administrator role with control over tasks related to the SAN
C. Create interface groups on NetApp storage
D. Apply NFS read/write access to a network share
Answer: B
QUESTION 14
Which Cisco Nexus switch is designed for low latency L2/L3 IP only networks?
A. Nexus 5548
B. Nexus 7000
C. Nexus 3048
D. Nexus 5596
Answer: C
QUESTION 15
In a FlexPod design, when can NetApp storage be directly connected to a Cisco UCS server?
A. Never
B. Always
C. Only in a FlexPod Select design
D. Only in a FlexPod Express design
E. Only in a FlexPod DataCenter design
Answer: C
QUESTION 16
Refer to the exhibit. Following FlexPod recommended practices, which portchannel configuration is valid for the connectivity shown?
A. A and B. portchannel 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. portchannel
1I and K. po11 and vpc 11J and L. po12 and vpc 12
B. A and B. vpc 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. vpc 4I and K. po11
and vpc 11J and L. po12 and vpc 12
C. A and B. portchannel 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. portchannel
4I and J. po11 and vpc 11K and L. po12 and vpc 12
D. A and B. portchannel 1C and D. vpc 2E and F. vpc 2G and H. portchannel 4I and J. vpc 11K
and L. vpc 11
E. A and B. po1 and vpc 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. po4 and vpc
4I and J. po11 and vpc 11K and L. po12 and vpc 12
Answer: A
QUESTION 17
Which hardware device should provide Fibre Channel services in a FlexPod design?
A. Cisco UCS 6248 Fabric Interconnect
B. NetApp FAS
C. Cisco Nexus 3000
D. Cisco Nexus 5500
Answer: D
QUESTION 18
When using Virtual Port Channel (vPC) on a Nexus 5500 switch, what protocol is responsible for synchronization of configuration, spanning tree, MAC and VLAN information?
A. Fibre Channel over Ethernet (FCoE)
B. Spanning Tree Protocol (STP)
C. LACP
D. Cisco Fabric Services over Ethernet (CFSoE)
Answer: D
QUESTION 19
Under what circumstance can a Cisco Nexus 5548 perform an ISSU (nondisruptive)?
A. When configured for VPCs
B. When configured for L3
C. When an STP-enabled switch is connected downstream
D. When the STP Bridge Assurance feature is running on a link other than the VPC peer link.
Answer: A
QUESTION 20
Refer to the exhibit. What would be the correct configuration for the ports labeled?
A. vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15
mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan
35spanning-tree port type edge trunkint vfc15bind interface po15switchport trunk allowed
vsan 35vsan databasevsan 35 interface vfc15
B. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport access
vlan 35int vfc15bind interface po15switchport trunk allowed vsan 45vsan databasevsan 45 interface vfc15
C. int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
D. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vlan 35switchport trunk allowed vsan 45spanning-tree port
type edge trunkvsan databasevsan 45 interface po15
E. int eth1/31-32channel-group 15 mode activeint po15switchport mode access vsan 45vsan databasevsan 45 interface po15
Answer: A
Lead2pass new released 500-170 PDF are now for free download, download it right now and pass your exam 100%.
500-170 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDdldaeTBWX3l5Wms
2017 Cisco 500-170 exam dumps (All 55 Q&As) from Lead2pass:
http://www.lead2pass.com/500-170.html [100% Exam Pass Guaranteed]