2016 October Cisco Official New Released 300-208 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
We at Lead2pass are committed to help you clear your 300-208 certification test with high scores. The chances of you failing to clear your 300-208 test, after going through our comprehensive exam dumps is very bleak.
Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-208.html
QUESTION 41
Which two statements about administrative access to the ACS Solution Engine are true? (Choose two.)
A. The ACS Solution Engine supports command-line connections through a serial-port connection.
B. For GUI access, an administrative GUI user must be created with the add-guiadmin command.
C. The ACS Solution Engine supports command-line connections through an Ethernet interface.
D. An ACL-based policy must be configured to allow administrative-user access.
E. GUI access to the ACS Solution Engine is not supported.
Answer: BD
QUESTION 42
What is the purpose of the Cisco ISE Guest Service Sponsor Portal?
A. It tracks and stores user activity while connected to the Cisco ISE.
B. It securely authenticates guest users for the Cisco ISE Guest Service.
C. It filters guest users from account holders to the Cisco ISE.
D. It creates and manages Guest User accounts.
Answer: D
QUESTION 43
What is the effect of the ip http secure-server command on a Cisco ISE?
A. It enables the HTTP server for users to connect on the command line.
B. It enables the HTTP server for users to connect using Web-based authentication.
C. It enables the HTTPS server for users to connect using Web-based authentication.
D. It enables the HTTPS server for users to connect on the command line.
Answer: C
QUESTION 44
When RADIUS NAC and AAA Override are enabled for WLC on a Cisco ISE, which two statements about RADIUS NAC are true? (Choose two.)
A. It will return an access-accept and send the redirection URL for all users.
B. It establishes secure connectivity between the RADIUS server and the ISE.
C. It allows the ISE to send a CoA request that indicates when the user is authenticated.
D. It is used for posture assessment, so the ISE changes the user profile based on posture result.
E. It allows multiple users to authenticate at the same time.
Answer: CD
QUESTION 45
What are the initial steps to configure an ACS as a TACACS server?
A. 1. Choose Network Devices and AAA Clients > Network Resources.
2. Click Create.
B. 1. Choose Network Resources > Network Devices and AAA Clients.
2. Click Create.
C. 1. Choose Network Resources > Network Devices and AAA Clients.
2. Click Manage.
D. 1. Choose Network Devices and AAA Clients > Network Resources.
2. Click Install.
Answer: B
QUESTION 46
Which two statements about administrative access to the Cisco Secure ACS SE are true? (Choose two.)
A. The Cisco Secure ACS SE supports command-line connections through a serial-port connection.
B. For GUI access, an administrative GUI user must be created by using the add-guiadmin command.
C. The Cisco Secure ACS SE supports command-line connections through an Ethernet interface.
D. An ACL-based policy must be configured to allow administrative-user access.
E. GUI access to the Cisco Secure ASC SE is not supported.
Answer: BD
QUESTION 47
When RADIUS NAC and AAA Override are enabled for a WLC on a Cisco ISE, which two statements about RADIUS NAC are true? (Choose two.)
A. It returns an access-accept and sends the redirection URL for all users.
B. It establishes secure connectivity between the RADIUS server and the Cisco ISE.
C. It allows the Cisco ISE to send a CoA request that indicates when the user is authenticated.
D. It is used for posture assessment, so the Cisco ISE changes the user profile based on posture result.
E. It allows multiple users to authenticate at the same time.
Answer: CD
QUESTION 48
In the command ‘aaa authentication default group tacacs local’, how is the word ‘default’ defined?
A. Command set
B. Group name
C. Method list
D. Login type
Answer: C
QUESTION 49
In an 802.1X authorization process, a network access device provides which three functions? (Choose three.)
A. Filters traffic prior to authentication
B. Passes credentials to authentication server
C. Enforces policy provided by authentication server
D. Hosts a central web authentication page
E. Confirms supplicant protocol compliance
F. Validates authentication credentials
Answer: ABC
QUESTION 50
Which two switchport commands enable MAB and allow non-802.1X capable devices to immediately run through the MAB process? (Choose two.)
A. authentication order mab dot1x
B. authentication order dot1x mab
C. no authentication timer
D. dot1x timeout tx-period
E. authentication open
F. mab
Answer: AF
QUESTION 51
Which two attributes must match between two Cisco ASA devices to properly enable high availability? (Choose two.)
A. model, interface configuration, and RAM
B. major and minor software release
C. tcp dead-peer detection protocol
D. 802.1x authentication identity
Answer: AB
QUESTION 52
What are two client-side requirements of the NAC Agent and NAC Web Agent installation? (Choose two.)
A. Administrator workstation rights
B. Active Directory Domain membership
C. Allowing of web browser activex installation
D. WSUS service running
Answer: AC
QUESTION 53
Which three algorithms should be avoided due to security concerns? (Choose three.)
A. DES for encryption
B. SHA-1 for hashing
C. 1024-bit RSA
D. AES GCM mode for encryption
E. HMAC-SHA-1
F. 256-bit Elliptic Curve Diffie-Hellman
G. 2048-bit Diffie-Hellman
Answer: ABC
QUESTION 54
In the command ‘aaa authentication default group tacacs local’, how is the word ‘default’ defined?
A. Command set
B. Group name
C. Method list
D. Login type
Answer: C
QUESTION 55
Which statement about IOS accounting is true?
A. A named list of AAA methods must be defined.
B. A named list of accounting methods must be defined.
C. Authorization must be configured before accounting.
D. A named list of tracking methods must be defined.
Answer: C
QUESTION 56
What are the initial steps to configure an ACS as a TACACS server?
A. 1. Choose Network Devices and AAA Clients > Network Resources.
2. Click Create.
B. 1. Choose Network Resources > Network Devices and AAA Clients.
2. Click Create.
C. 1. Choose Network Resources > Network Devices and AAA Clients.
2. Click Manage.
D. 1. Choose Network Devices and AAA Clients > Network Resources.
2. Click Install.
Answer: B
QUESTION 57
Which effect does the ip http secure-server command have on a Cisco ISE?
A. It enables the HTTP server for users to connect on the command line.
B. It enables the HTTP server for users to connect by using web-based authentication.
C. It enables the HTTPS server for users to connect by using web-based authentication.
D. It enables the HTTPS server for users to connect on the command line.
Answer: C
QUESTION 58
A network administrator needs to implement a service that enables granular control of IOS commands that can be executed. Which AAA authentication method should be selected?
A. TACACS+
B. RADIUS
C. Windows Active Directory
D. Generic LDAP
Answer: A
QUESTION 59
An administrator can leverage which attribute to assign privileges based on Microsoft Active Directory user groups?
A. member of
B. group
C. class
D. person
Answer: A
QUESTION 60
Cisco 802.1X phasing enables flexible deployments through the use of open, low-impact, and closed modes. What is a unique characteristic of the most secure mode?
A. Granular ACLs applied prior to authentication
B. Per user dACLs applied after successful authentication
C. Only EAPoL traffic allowed prior to authentication
D. Adjustable 802.1X timers to enable successful authentication
Answer: C
Lead2pass helps millions of candidates pass the Cisco 300-208 exam and get the certification. We have tens of thousands of successful stories. Our dumps are reliable, affordable, updated and of really best quality to overcome the difficulties of Cisco 300-208 certifications. Lead2pass exam dumps are latest updated in highly outclass manner on regular basis and material is released periodically.
300-208 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDM1I1WlhIdHJZNjA
2016 Cisco 300-208 exam dumps (All 250 Q&As) from Lead2pass:
http://www.lead2pass.com/300-208.html [100% Exam Pass Guaranteed]